Toyota — Mast

Mast Strip Adjustment l-%--' Roller 11 u ~ n n e r mast 1. Mast strip clearance adjustment (1) Measure the clearance with the inner mast at the bottom position. (2) With the inner mast in contact with the outer mast roller, adjust the clearance between the mast strip and inner mast to the following value by inserting the mast strip shim. (The shim replacement proce - dure is the same as that described in the " mast roller removal~installation" section on page 13 - 1 4.) Standard clearance E = 0.5 - .O mm (0.020 - 0.039 in) Shim thickness: 0.5 and 1.0 mm (0.020 and 0.039 in) 1 (3) After the adjustment, the mast should move smoothly.