Toyota — Mast

INSPECTION 1. Inspect the chain elongation. SST 09631 - 22000 - 71 Note: When inspecting the chain elongation, use the SST above and inspect without removal from the vehicle. The chain elongation rate varies from place to place; thereby check the whole span. Standard chain link pitch 1 ton series: 15.88 mm (0.6252 in) (Type: BL634) 3 ton series: 25.4 mm (1.000 in) (Type: BL534) 2 ton series: 19.05 mm (0.7500 in) (Type: BL823) REASSEMBLY Chain Adjusting Nut Tightening Sequence a and 1 Tighten nuts - 57.88 @ . Tightening torque T = 49.03 - 78.45 N-m (500 - 800 kg - cm) [36.18 ft-lbl 2 Tighten nut 0. mast and portion V: Lift bracket SV: Lift bracket FV: Lift bracket FSV: Lift bracket FSV:

Inner mast Sketch a Center of Install with the cotter pin on the vehicle center side. 0 Center of vehicle Cot Pin Install with the cotter pin on the vehicle center side. 0 Front of Install with the cotter pin on the vehicle front side.