Mitsubishi — 2.15 Installing tappet

REASSEMBLY OF BASIC ENGINE 2.14 Installing gear pump housing (1) Install the gear pump housing to the stud bolts on the gear case. (2) Tighten the gear pump housing bolt. (3) Install the last stud bolt to the gear pump housing. Stud (M8 ˜ 1.25 mm-15 mm) Gear pump housing Bolt Installing gear pump housing 2.15 Installing tappet Coat the periphery of tappets with engine oil, insert them into the tappet holes and place them gently on the camshafts. Apply engine oil. Inserting tappet 7-14