Mitsubishi — 3.2 Installing flywheel housing

REASSEMBLY OF BASIC ENGINE 3. Reassembling flywheel 3.1 Installing oil seal case &$87,21 Be careful not to damage the oil seal. Oil seal case (1) Install the new oil seal gasket. (2) After applying engine oil to the entire circumference of the oil seal lips, install the oil seal case on the cylinder block. Installing oil seal case 3.2 Installing flywheel housing (1) Clean the mounting surface of the gasket. (2) Apply sealant to the gasket to prevent it from falling off. (3) Install the gasket. (4) Install the flywheel housing, aligning its dowel pin holes and dowel pins, and tighten the bolts. Note:

When the dowel pins are worn or when the flywheel housing is replaced, replace the dowel pins with new ones. Installing flywheel housing 7-15