FUEL SYSTEM 2.5.2 Assembling delivery valve &$87,21 (a) Do not reuse the O-ring. (b) Install a new O-ring so that it is not cut with Delivery valve holder O-ring threads of the valve holder. Delivery valve spring Assemble the delivery valve, delivery valve gasket and delivery valve spring. Then with the O-ring installed, temporarily tighten the delivery valve holder. Delivery valve gasket Delivery valve Assembling delivery valve 2.5.3 Assembling control sleeve (1) Reverse the pump housing and grab the housing with a vise. (2) Install the sleeve with the protrusion of the control sleeve the control rack side (opposite side to the knock pin).
The protrusion can be seen through the housing hole. Pump housing Control sleeve Knock pin Protrusion Control rack side Assembling control sleeve 2.5.4 Assembling plunger (1) Assemble the spring upper seat and plunger spring. Plunger spring Spring upper seat (2) Place the stamped side of the collar of the plunger to the opposite side to the protrusion of the control sleeve (opposite side to the control rack side). Assemble the spring lower seat to the plunger and insert the plunger into the control sleeve. Assembling plunger spring Sleeve Stamp Control rack side Protrusion Plunger Control sleeve Assembling direction of plunger 8-16