Mitsubishi — 1.3 Fuel system

SERVICE DATA Table 2-2 Maintenance service data table - Basic engine(4 / 4) Unit mm [in.] 1.3 Fuel system Table 2-3 Maintenance service data table - Fuel system Unit:

mm [in.] 2-5 Inspection point Nominal Standard Limit Remark Crankshaft Journal outside diameter (STD) ø 43 [1.69] 42.965 to 42.980 [1.6915 to 1.6921] -0.70 [-0.0276] Repair limit is -0.15 [-0.0059] Pin outside diameter (STD) ø 40 [1.57] 39.965 to 39.980 [1.5734 to 1.5740] Runout 0.06 [0.0024] or less TIR Clearance between main bearing and crankshaft 0.030 to 0.075 [0.0012 to 0.0030] 0.10 [0.0039] Clearance between connecting rod bearings 0.028 to 0.071 [0.0011 to 0.0028] 0.150 [0.0059] End play 0.050 to 0.175 [0.0020 to 0.0069] 0.500 [0.0197] Timing gear backlash Between crank gear and idler gear 0.010 to 0.136 [0.0004 to 0.0054] Spur gear 0.300 [0.0118] Replace 0.040 to 0.118 [0.0016 to 0.0047] Helical gear Between idler gear and valve camshaft gear Between idler gear and pump camshaft gear 0.010 to 0.136 [0.0004 to 0.0054] Spur gear 0.037 to 0.117 [0.0015 to 0.0046] Helical gear Between valve camshaft gear and PTO gear 0.010 to 0.220 [0.0004 to 0.0087] Spur gear 0.007 to 0.235 [0.0003 to 0.0091] Helical gear Cam height of camshaft (major axis) 27.37 [1.08] 27.27 to 27.47 [1.0736 to 1.0815] 26.37 [1.0382] Cam height of fuel injection pump camshaft (major axis) 30 [1.18] 29.9 to 30.1 [1.177 to 1.185] 29 [1.1417] Replace Flywheel flatness 0.08 [0.0031] or less 0.50 [0.0197] Clearance between tappet and cylinder block bore 0.007 to 0.049 [0.0003 to 0.0019] 0.150 [0.0059] Replace tappet.

Clearance between camshaft journal and cylinder block bore 0.050 to 0.100 [0.0020 to 0.0039] 0.150 [0.0059] Replace camshaft or cylinder block Clearance between idler gear bushing and idler shaft ø 20 [0.79] 0.030 to 0.066 [0.0012 to 0.0026] 0.200 [0.0079] Inspection point Nominal Standard Limit Remark Fuel injection nozzle pressure 13.73 MPa {140 kgf/cm²} [1992 psi] 13.73 to 14.73 MPa {140 to 150 kgf/cm²} [1992 to 2134 psi] Adjust with washers.