Mitsubishi — 3.8 Removing governor shaft and speed control lever

DISASSEMBLY OF BASIC ENGINE 3.5 Removing PTO gear Pull out the PTO gear together with two ball bearings from the gear case. PTO gear Ball bearing Removing PTO gear 3.6 Removing oil pump Remove the oil pump housing from the gear case, and then remove the oil pump outer gear and oil pump inner gear. Oil pump inner gear Oil pump housing Oil pump outer gear Gear case Removing oil pump 3.7 Removing relief valve (1) Remove the plug from the gear case. (2) Remove the oil relief spring and relief plunger. Relief plunger Plug Relief spring Gear case Removing relief valve 3.8 Removing governor shaft and speed control lever (1) Remove the sealing cap from the side of the gear case.

(2) Pull out the grooved pin A. (3) Remove the governor shaft. (4) Remove the tension lever and governor lever. (5) Remove the governor spring lever. (6) Remove the grooved pin B. (7) Remove the speed control lever. (8) Remove the governor cover. Speed control lever Governor shaft cover Tension lever Grooved pin B Governor spring lever Sealing cap Governor lever Governor shaft Grooved pin A Gear case Removing governor shaft and speed control lever 5-10