DISASSEMBLY OF BASIC ENGINE 4.1 Removing oil pan &$87,21 Do not insert a chisel or screwdriver between the oil pan and crankcase to remove the oil pan, as it could deform the oil pan flange. (1) Turn the engine around. (2) Remove bolts from the oil pan. (3) To remove oil pan, tap bottom corners of the oil pan with a plastic hammer. Removing oil pan 4.2 Removing oil screen Loosen the nut, and remove the oil screen and gasket. Oil screen Removing oil screen 4.3 Removing connecting rod cap (1) Lay the engine by its side. (2) Mark the cylinder number on the connecting rod and connecting rod cap so that their combination is not changed when reassembling. (3) Remove the connecting rod caps. Note:
Mark the cylinder No. and upper/lower on connecting rod bearings to ensure correct reassembling. Removing connecting rod cap 5-16