Mitsubishi — 4.6 Removing piston pin

DISASSEMBLY OF BASIC ENGINE 4.4 Pulling out piston (1) Turn the crankshaft to bring the piston to the top dead center. (2) Using a piece of wood such a hammer handle, push the mating surface of the connecting rod cap, and pull the piston and connecting rod upward from the cylinder. Connecting rod Pulling out piston 4.5 Removing piston ring Remove the piston rings using piston ring pliers. Removing piston ring 4.6 Removing piston pin Remove the piston pin using a piston pin setting tool. Identification mark Pushrod Connecting rod Piston pin Piston pin setting tool Removing piston pin 5-17 Special tool name Part No.

Piston pin setting tool For L2A, L3A 30L91-00030 For L2C, L3C 30L91-00020 For L2E, L3E 30L91-10010 Part descrip- tion ldentification mark Applicable to Push rod D18 For18mm [0.70868 in.] piston pin D21 Forφ21mm [0.82677 in.] piston pin