Komatsu — WORK POSSIBLE USING WHEEL LOADER

. OPERATION OPERATION DIGGING OPERATIONS WARNING operations. Never carry out these NOTICE bucket, and the tires will slip. loaded. accelerator depress the accelerator pedal the it is depressed fully, the fuel but there will be no increase in the 3 - 114 WORK POSSIBLE USING WHEEL LOADER This section explains about general operations. Be su re to operate the machine correctly. For details, see PAGE 3-120)". This section explains abo "PRECAUTIONS WHEN H ANDLING BLASTED ROCK ( In addition to the following, i t is possible to further increase the range of application s by using various att achments.

directly to the front when carryi ng out digging or scoopin operations with the machine ar If the tires slip, the tire life will be reduced, so do not allow the tir es to slip during operation LOADING PILED SOIL OR B LASTED ROCK When loading piled soil or blasted rock,drive the machin e forward as follows to lo ad. To prevent cutting of the tires caused by the tires slippi Always keep the oper When working with sto machine in 1st gear. ng, be careful of the following points during the operat ion. Always keep the oper ating jobsite flat, and remove any fallen rocks.

When working with sto ckpiles, operate the machine i n 1st or 2nd gear; when loading blasted rock o perate the machine in 1st gear. 1. When driving the mach ine forward and lowering the s i top the bucket about 30 cm (12 in) from the ground, th t slowly. REMARK If the bucket hits the ground, the front tires will come off the 2. Shift down immediately in front of the material to be p When completing the shift down, depress the acc edal at the same time and thrust the bucket into the REMARK To reduce fuel consumptio T o r minimum possible amount consumption will increase, amount loaded.