. MAINTENANCE SERVICE PROCEDURE CHECK TRANSMISSION OIL LEVEL, ADD OIL WARNING 2. Use sight gauge (G) to check the oil level. Make an oil level check before starting engine or 60 minutes or more after the 4 - 29 The parts and oil are a t high temperature immediately afte r the engine is stopped, and may cause burns to go down before sta rting the work. Carry out this pro cedure if there is any sign of oil on the transmission case, or if there is oil mixed with the cooling water. 1. Stop the engine and remove the cap from oil fi 3. If the oil level is not within the range at upper area "A" of the d oil through oil filler (F).
il, it is possible to use the frame lock bar as a e oil to use, see "USE OF FUEL, COOLANT CANTS ACCORDING TO AMBIENT E (PAGE 4-11)". sight gauge, ad When adding o step. For details of th AND LUBRI TEMPERATUR 4. If the oil level is above the A mark on sight gau ge (G), remove drain plug (1), l check the oil le oosen drain plug (2), drain the e xcess oil, then vel again. s correct, tighten the cap of oil filler port (F) 5. If the oil level i securely. engine is stopped. If oil rem ains at various red. rrect oil level cannot be measu The oil level can als o be checked at low idling. In th is case, the oil should be within the rang the sight gauge.
Ho wever, the time taken for the oi l level to become steady will differ accor and the oil tempera ture.