. MAINTENANCE SERVICE PROCEDURE CHECK AIR CONDITIONER COMPRESSOR BELT TENSION, ADJUST (1). approx. 12.5 to 16.5 mm (0.5 to 0.7 in) conditioner compressor pulley and drive CHECK WHEN CHANGING THE V-BELT 12.5 mm (0.355 to 0.5 in) 4 - 53 Carry out the in spection a nd adjustme nt work after rem CHECKING The deflection when pressed w The when midw pulle Whe of 35 n using a b 3 to 530 N elt tension (36 to 54 The d eflection s hould be a pprox. 9 to 12.5 mm (0.355 to 0.5 in) wh en pressed with a finger force of approx. 98.1 N (10 k g) at a poi nt midway between th e air conditioner compressor pulley and drive pulley.
Whe n using a b elt tension gauge, the tension should be in a range of 530 to 745 N (54 to ADJUSTING 1. L oosen loc 2. T urn adjust ment nut ( 2) to adjust so that the belt te pecified va eflection when cheking: [98.1 N (10 kg)] 12.5 to 1 to 0.7 i eflection when replacing: [98.1 3. A fter adjust ing, tighte n lock nut (1 4. C heck each pulley for damage, w ear of the V-groov f the V-bel t. Be particularly care ful to check that t ot in conta ct with the bottom of t he V-groove. 5. If the belt h as elongat ed and ther e is no more allo wance for adjustment, or if the belt is cut or cracked, replace he belt.
the V-belt has been r eplaced wit h a new part, the re will be initia l elongation, so inspect and adjust it again after ne-hour of operation .