Komatsu — EVERY 2000 HOURS SERVICE

. MAINTENANCE SERVICE PROCEDURE 4 - 74 CLEAN HYDRAULIC TANK STRAINER When changing the oil in the hydraulic tank , drain th e oil from the tank a nd clean the straine 1. Loosen bolts (1) and (3), then remove covers (2) and (4). 1. Loosen bolts (1) and (3), then remove c overs (2) 2. Loosen bolt (5), re move strainer cover (6), then remove with spring (7). strainer (8) together 3. Remove any dirt fro or flushing oil. m strainer (8), then wash in clean light oil en, replace it with a new part. wash in clean ligh t oil or If strainer (8) is brok en, replace it with a new par 4. Install spring (7), str ainer (8), and cover (6).

Wh en doing t his, look through the mo unting hole of cove r (4) to c ole. heck that the the strainer guide pin is fitted in the guide h When installing cove r (6), coat the threa d of bolt ( 5) with thread tightener (LT-2) to prevent it from coming loos e. If bolt (5) becomes loose and drops out, it will be sucked i nto the piston pump and will dama ge the pump. bolt (5): 5 to 12.5 kgm, 39.8 to 90.4 lbft) (4). of the covers with new parts. Tightening torque of 53.7 to 122.3 Nm (5. 5 to 12.5 kgm, 39.8 to 90.4 5. Install covers (2) and Replace the O-rings of the covers with new parts