Komatsu — EVERY 2000 HOURS SERVICE

. MAINTENANCE SERVICE PROCEDURE REPLACE FILTER ELEMENT IN BRAKE OIL TANK WARNING may cause burns. Wait for the 4 - 79 The temperature to go do wn before startin g the wor When removing the oil filler cap, turn it slowly t o release t he i ntern al pressure , then remov 1. Open the cover o n top of the platform on t he left sid e of the c ab, then remove ca p (F). Keep g rip (1) pulled, turn cap (F) . pulled (F) counterclockwise , and remove it 2. Remove mountin g bolts (3) of filt er cover (2), t hen remove the cover. the cover may spring out under the force of When doing this, the forc e of spring (4), so hol d the cover dow n when removing the bolt s. 3.

Remove spring ( 4) and bypass v alve (5), then r emove element (6). 4. 5. Install a new ele ment, then plac e bypass valve (5) , spring (4), and cover (2) int o the tank. -ring (7) with a new one. the cover bolts, push down the cover and evenly. 6. Replace cover O When installing tighten the bolts 7. Close the cover o n top of the platform on t he left sid e of the c ab.