Appendix A • Parameter Listings 198 Detroit Diesel Application User’s Manual Parameter Range Description STBD ENG RUN YES or NO Indicates whether the Starboard engine is running. PORT THROT QUAL YES or NO Indicates the qualification of the active throttle lever on the Port side. STBD THROT QUAL YES or NO Indicates the qualification of the active throttle lever on the Port side. PORT SHIFT QUAL YES or NO Indicates the qualification of the active shift lever on the Port side. STBD SHIFT QUAL YES or NO Indicates the qualification of the active shift lever on the Starboard side. REV DRAG DOWN YES or NO Indicates the current status of the reverse drag down mode.
PT GEAR ACT LD OK or OVRLD Indicates if the Port gear actuator is overloaded. Only available for version 3.0 marine controls. PT GEAR ACT COMS OK or BAD Indicates if the communications to the Port 3.0 marine controls. ST GEAR ACT LD OK or OVRLD Indicates if the Starboard gear actuator is overloaded. Only avail- able for version 3.0 marine controls. ST GEAR ACT COMS OK or BAD Indicates whether the communica- tions to the Starboard Gear Actuator are valid. Only available for version 3.0 marine controls. PORT GEAR ACT V 0.0 to 99.9 Indicates voltage sensed at the Star- board Gear Actuator. Only available for version 3.0 marine controls.
STBD GEAR ACT V 0.0 to 99.9 Indicates voltage sensed at the Star- board Gear Actuator. Only available for version 3.0 marine controls. PORT PRESS SW ON or OFF Indicates whether the Port gear pressure switch is closed. Only avail- able for version 2.0 and 2.5 marine controls. Note: This will indicate “OFF” if no pressure switch is installed.