. MAINTENANCE MAINTENANCE PROCEDURE MAINTENANCE MAINTENANCE PROCEDURE on the radiator side and drain 4 - 27 3. Remove co 4. Check that the cooling wate r temperature h as gone d own enough to m ake it possible to t ouch the radiator cap surfac e by hand, then turn radiator cap (3) slowly until it contacts the e. stopper to r elease the pressur 5. Following th is, push radiator c ap (3), turn it unti l it contact s the stopper, the n remove it. 6. valve cover (5) on the engine 7. Set contain ers to catch the dr ained coolant un der drain v alve (6) on the ra diator side and dr ain valve (7) on t he engine site. Open drain valves (6) and (7), and drain the c oolant. 8.
After drainin g the antifreeze so lution, close dra in valve (6) , (7), then fill with clean water. After the radiator is fi lled with w ater, start and ru n the engine at lo After the w ater temperature about 10 mi 9. Stop the en water. 10. 11. After drainin For the clea Close drain g the water, clean ning method, follo valves (6), (7).