Isuzu — 7-18 Periodic maintenance

8. When the bleeding operation is completed on each wheel, check the level of brake fluid in the reservoiir and replenish it as necessary. 7. Release the brake pedal carefully. Repeat the above operation until air bubbles disappear from the brake fluid being pumped out into the container. During the bleeding operation, keep the brake fluid reservoir filled to the specified level. Install the rubber cap. - 7–38 - SERVICE AND MAINTENANCE 6. Pump the brake pedal slowly 3 times and hold it depressed. Loosen the bleeder screw to release brake fluid with air bubbles into the container and tighten the bleeder screw immediately.