Komatsu PC210-8, PC210LC-8, PC210NLC-8, PC230NHD-8, PC240LC-8, PC240NLC-8 — Removal and installation of operator cab glass (stuck glass)

UEN00665-00 50 Disassembly and assembly a Parts to be coated with primer; Apply the prim- er all over dimension (a). a Never apply the wrong primer. If the glass primer, etc. is applied by mistake, wipe it off with white gasoline. q Dimension to apply primer (a) : 25 mm 4) Apply the glass primer to the sticking sur- faces of window glass (9). 2 Glass primer; Sunstar primer for glass 580 super a Do not apply the primer more than 2 times. (If it is applied more than 2 times, its performance will be lowered.) a In addition to the above parts, additionally apply the primer to right side window glass (1) and door lower window glass (3).

q Range to apply primer additionally for right side window glass (1): (b) q Range to apply primer additionally for door lower window glass (3): (c) a After applying the primer, leave it for at least 5 minutes (within 8 hours) to dry. a Parts to be coated with primer; Apply the primer to all around of sticking surface (d) of window glass (9) for dam rubber (6) installation position and operator's cab (8). a Do not apply the primer to the boarder about 5mm wide between the black part and transparent part of the glass. a After applying the primer, leave it for at least 5 minutes (within 8 hours) to dry. a Never apply the wrong primer. If the paint primer, etc.

is applied by mistake, wipe it off with white gaso- line. 8 PC210, 230, 240-8