50 Disassembly and assembly UEN00665-00 4. Stick dam rubber (both-sided adhesive tape)(6) along the inside edge of the glass sticking section. a Do not remove the release tape of dam rubber on the glass sticking side before sticking the glass. a When sticking the dam rubber, do not touch the cleaned surface to the utmost. a Exercise care should be taken to not to float the dam rubber of each sticking cor- ner. 2) Stick dam rubber (6) for left side window glass (2) to the position as shown in the figure. a When sticking dam rubber (6) around a frame, do not lap its finishing end over the starting end. Or, make clearance of about 5mm between them(e).
1) Stick dam rubber (6) for right side window glass (1) to the position as shown in the figure. a Stick dam rubber (6a) additionally to right side window glass (1). q Positions to stick additional dam rub- ber to the right side window glass: (f): 50 mm (g): 90 mm (h): 250 mm PC210, 230, 240-8 9