UEN00227-00 20 Standard value table 12 PC210, 230, 240-8 Applicable model PC240LC, 240NLC-8 Cate- gory Item Measurement condition Unit Standard value for new machine Judgement criteria Operating force of control levers and pedal Boom control lever • Hydraulic oil temperature: Within operating range • Engine at high idle • Control lever grip at center • Pedal at tip • Max. reading up to stroke end N {kg} 15.7 ± 3.9 {1.6 ± 0.4} Max. 24.5 {Max. 2.5} Arm control lever N {kg} 15.7 ± 3.9 {1.6 ± 0.4} Max. 24.5 {Max. 2.5} Bucket control lever N {kg} 12.7 ± 2.9 {1.3 ± 0.3} Max. 21.6 {Max. 2.2} Swing control lever N {kg} 12.7 ± 2.9 {1.3 ± 0.3} Max. 21.6 {Max.
2.2} Travel control lever N {kg} 24.5 ± 5.9 {2.5 ± 0.6} Max. 39.2 {Max. 4.0} Travel control pedal N {kg} 74.5 ± 18.6 {7.6 ± 1.9} Max. 107.6 {Max. 11} Hydraulic pressure Unload pressure • Hydraulic oil temperature: Within operating range • Engine at high idle • Working mode: P mode • Hydraulic pump output pressure with all control levers in NEUTRAL position MPa {kg/cm2} 3.5 ± 1.0 {36 ± 10} 3.5 ± 1.0 {36 ± 10} Boom relief • Hydraulic oil temperature: Within operating range • Engine at high idle • Working mode: P mode • Hydraulic pump output pressure with all measurement circuits relieved Normal relief MPa {kg/cm2} 34.8 ± 1.0 {355 ± 10} 33.3 – 36.8 {340 – 375} Power max.
MPa {kg/cm2} 37.3 ± 1.0 {380 ± 10} 36.3 – 39.2 {370 – 400} Arm relief Normal relief MPa {kg/cm2} 34.8 ± 1.0 {355 ± 10} 33.3 – 36.8 {340 – 375} Power max. MPa {kg/cm2} 37.3 ± 1.0 {380 ± 10} 36.3 – 39.2 {370 – 400} Bucket relief Normal relief MPa {kg/cm2} 34.8 ± 1.0 {355 ± 10} 33.3 – 36.8 {340 – 375} Power max. MPa {kg/cm2} 37.3 ± 1.0 {380 ± 10} 36.3 – 39.2 {370 – 400} Swing relief • Hydraulic oil temperature: Within operating range • Engine at high idle • Working mode:
P mode • Hydraulic pump output pressure with all measurement circuits relieved MPa {kg/cm2} 30.3 ± 1.5 {310 ± 15} 28.4 – 32.3 {290 – 330} Travel relief MPa {kg/cm2} 38.7(+1.0/–2.0) {395(+10/–20)} 36.8 – 40.2 {375 – 410} Control circuit source pressure • Hydraulic oil temperature: Within operating range • Engine running at high idle • Self pressure reducing valve output pressure with all control levers in NEUTRAL position MPa {kg/cm2} 3.23(+0.2/–0.3) {33(+2/–3)} 2.75 – 3.43 {28 – 35} LS differential pressure • Hydraulic oil temperature: Within operating range • Engine at high idle • Working mode: P mode • Traveling speed:
Hi • Run either track with no load • Hydraulic oil pump pressure – LS pressure When all control levers in NEUTRAL position MPa {kg/cm2} 3.5 ± 1.0 {36 ± 10} 3.5 ± 1.0 {36 ± 10} When traveling at half stroke MPa {kg/cm2} 1.8 ± 0.1 {18 ± 1} 1.8 ± 0.1 {18 ± 1}