Komatsu PC210-8, PC210LC-8, PC210NLC-8, PC230NHD-8, PC240LC-8, PC240NLC-8 — Adjusting play of work equipment and swing PPC valves

30 Testing and adjusting UEN00228-00 Adjusting play of work equipment and swing PPC valves 1 a If the right and left work equipment levers have large play, adjust them according to the follow- ing procedure. 1. Remove the work equipment and swing PPC valve assembly. 2. Remove bellows (1). 3. Loosen locknut (2) and tighten disc (3) until it touches the heads of 4 pistons (4). a Do not move the piston at this time. 4. Fix disc (3) and tighten locknut (2) to the speci- fied torque. 3 Locknut: 98 – 127 Nm {10 – 13 kgm} 5. Install bellows (1). 6. Install the work equipment and swing PPC valve assembly. PC210, 230, 240-8 47