Komatsu PC210-8, PC210LC-8, PC210NLC-8, PC230NHD-8, PC240LC-8, PC240NLC-8 — Measuring oil leakage

30 Testing and adjusting UEN00228-00 Measuring oil leakage 1 2. Measuring oil leakage from arm cylinder 1) Move the arm cylinder to the IN stroke end and stop the engine. a Measuring tools for oil leakage k Release the residual pressure from the piping on the arm cylinder head side. For details, see Releas- ing residual pressure from hydrau- lic circuit (Operate the lever in the arm IN direction only, however). 2) Disconnect hose (2) on the cylinder head side and block the hose side with a flange. a Measure the oil leakage under the following condition. q Hydraulic oil temperature: Within operating range k Take care not to disconnect the hose on the cylinder bottom side.

a Use the following part to block the hose side. 07379-00640 (Flange #06) 1. Measuring oil leakage from boom cylinder 1) Move the boom cylinder to the RAISE stroke end and stop the engine. k Release the residual pressure from the piping on the boom cylinder head side. For details, see “Releas- ing residual pressure from hydrau- lic circuit” (Operate the lever in the boom RAISE direction only, how- ever). 2) Disconnect hose (1) on the cylinder head side and block the hose side with a flange. k Take care not to disconnect the hose on the cylinder bottom side. a Use the following part to block the hose side.

07379-00640 (Flange #06) 3) Run the engine at high idle and relieve the arm circuit by moving the arm IN. k Take care not to "move the arm OUT". 4) Start measuring the oil leakage 30 sec- onds after relieving is started and mea- sure for 1 minute. 5) After finishing measurement, return the removed parts. 3) Run the engine at high idle and relieve the boom circuit by raising the boom. k Take care not to "lower the boom". 4) Start measuring the oil leakage 30 sec- onds after relieving is started and mea- sure for 1 minute. 5) After finishing measurement, return the removed parts. PC210, 230, 240-8 51 Symbol Part No. Part name Q Commercially available Measuring cylinder