Komatsu PC210-8, PC210LC-8, PC210NLC-8, PC230NHD-8, PC240LC-8, PC240NLC-8 — Measuring oil leakage

30 Testing and adjusting UEN00228-00 5. Measuring oil leakage from travel motor 1) Remove the travel motor cover. 2) Run the engine, lock the travel mecha- nism, and stop the engine. 5) After finishing measurement, return the removed parts. k Put pin [1] between the sprocket and track frame to lock the travel mechanism securely. 3) Disconnect drain hose (5) of the travel motor and block the hose side with a plug. a Use the following part to block the hose side. 07376-70422 (Plug #04) 4) Run the engine at high idle, relieve the travel circuit, and measure the oil leakage. k Before operating the travel lever, check the position and locking direction of the locked sprocket again.

k Wrong operation of the lever can cause an accident. Accordingly, make signs and checks securely. a Start measuring the oil leakage 30 seconds after relieving is started and measure for 1 minute. a Measure several times, moving the motor a little (changing the position of the valve plate and cylinder and that of the cylinder and piston) each time. PC210, 230, 240-8 53