Komatsu PC210-8, PC210LC-8, PC210NLC-8, PC230NHD-8, PC240LC-8, PC240NLC-8 — Special functions of machine monitor

30 Testing and adjusting UEN00229-00 Default (Setting of attachment/maintenance pass- word) Check or change various settings related to the machine monitor and machine by "Default". The function of setting attachment/maintenance password is used to set the display of the password screen when the functions related to the attach- ment and maintenance are used in the operator mode. 3. Selecting Disable/Enable After the With/Without attachment screen is displayed, select the setting with the function switches. q Disable : Password screen is not dis- played q Enable : Password screen is displayed q [F3] : Move to lower item q [F4] : Move to upper item q [F5] :

Cancel selection and return to "Default" screen 1. Selecting menu Select "Default" on the service menu screen. q [F6] : Confirm selection and return to "Default" screen 2. Selecting sub menu After the "Default" screen is displayed, select Attachment/Maintenance password with the function switches or numeral input switches. a Select this item similarly to an item on the Service menu screen. 4. Displaying attachment/maintenance password screen When the following operation is performed, the password screen is displayed in the operator mode. q Maintenance mode: The Maintenance table screen is changed to the Mainte- nance interval reset screen. q User mode:

On the User menu screen, the Breaker/Attachment setting menu is selected and the screen is changed to the Attachment setting menu screen. 5. Changing attachment/maintenance password The password can be changed by operating the switches specially in the operator mode. a See Attachment/Maintenance password changing function in the operator mode. a Default password: [000000] a If the password setting is changed from Enable to Disable, the password is reset to the default. When Enable is set again, be sure to set a new password. a The attachment/maintenance password is different from the engine start lock pass- word. PC210, 230, 240-8 41