30 Testing and adjusting UEN00229-00 3. Starting no injection cranking If no injection cranking (Fuel injection in no cyl- inders) becomes effective, that is displayed on the screen. Under this condition, crank the engine with the starting motor. a While the screen is changing to the follow- ing screen, the screen of "Setting is being prepared" is displayed. a Limit the cranking time to 20 seconds to protect the starting motor. 5. Prohibiting no injection cranking If the operator tries to perform the no injection cranking while the engine is running, the mes- sage that the engine is running is displayed and the no injection cranking is not set effec- tive.
a This function can be selected even while the engine is running. If the no injection cranking is performed, however, the mes- sage of "Engine is running" is displayed on the screen. 4. Finishing no injection cranking After completing the no injection cranking operation, press [F6], and finish of no injection cranking is displayed and the screen returns to the Service menu screen automatically. PC210, 230, 240-8 51