UEN00230-00 30 Testing and adjusting 7. Supply pump IMV solenoid (FUEL REGU- LATOR) a Disconnection and connection of con- nector The connector of the supply pump IMV solenoid has a special locking mecha- nism. Disconnect it according to steps (a) – (b) and connect it according to steps (c) – (d) as shown below. Disconnection : (a) Unlock – (b) Discon- nect connector. Connection : (c) Connect connector – (d) Lock. 9. Engine coolant temperature sensor (COOL- ANT TEMP) a Disconnection and connection of con- nector The connector of the engine coolant tem- perature sensor has a special locking mechanism.
Disconnect it according to steps (a) – (b) and connect it according to steps (c) – (d) as shown below. Disconnection : (a) Unlock – (b) Discon- nect connector. Connection : (c) Connect connector – (d) Lock. 8. Common rail pressure sensor (FUEL RAIL PRESS) a Disconnection and connection of con- nector The connector of the common rail pres- sure sensor has a special locking mecha- nism. Disconnect it according to steps (a) – (b) and connect it according to steps (c) – (d) as shown below. Disconnection : (a) Unlock – (b) Discon- nect connector. Connection : (c) Connect connector – (d) Lock.
a Removal and installation of sensor A deep socket is necessary for removal and installation of the engine coolant tem- perature sensor. See "Tools for testing, adjusting, and troubleshooting". 6 PC210, 230, 240-8