40 Troubleshooting UEN00240-00 Failure code [CA234] Eng Overspeed 1 PC210, 230, 240-8 47 User code Failure code Trouble Engine overspeed (Engine controller system) — CA234 Contents of trouble • Engine speed exceeded control upper speed limit. Action of controller • Stops injection until engine speed lowers to normal level. Problem that appears on machine • Engine speed fluctuates. Related infor- mation • Engine speed can be checked with monitoring function. (Code: 01002 Engine speed) • Method of reproducing failure code: Run engine at high idle.
Possible causes and standard value in normal state Cause Standard value in normal state/Remarks on troubleshooting 1 Use of improper fuel Fuel used may be improper. Check it directly. 2 Improper use Machine may be used improperly. Teach operator proper using method. 3 Defective engine controller If cause 1 is not detected, engine controller may be defective. (Since trouble is in system, troubleshooting cannot be carried out.)