40 Troubleshooting UEN00241-00 Failure code [CA559] Rail Press Low Error 1 PC210, 230, 240-8 27 User code Failure code Trouble Common rail pressure low error (Engine controller system) E15 CA459 Contents of trouble • There is low pressure error in common rail circuit. Action of controller • None in particular. Problem that appears on machine • Engine does not start at all or does not start easily. • Exhaust gas becomes black. • Engine output lowers. Related infor- mation • Common rail pressure can be checked with monitoring function. (Code: 36400 Common rail pres- sure) • Method of reproducing failure code: Start engine.
Possible causes and standard value in normal state Cause Standard value in normal state/Remarks on troubleshooting 1 Fuel leakage to outside Fuel may be leaking to outside. Check it directly (Check visually while running engine at low idle). 2 Defect in low pressure cir- cuit parts a For check of pressure in fuel low pressure circuit, see Testing and adjusting, Checking fuel pressure.
Pressure in fuel low- pressure circuit During cranking (if engine cannot be started) 0.3 – 1.1 MPa {3.1 – 11.3 kg/cm2} During low idle (if engine can be started) 0.5 – 1.3 MPa {5.1 – 13.3 kg/cm2} 3 Defective pressure limiter a For check of leakage through pressure limiter, see Testing and adjusting, Checking fuel return rate and leakage. Leakage through pressure limiter During low idle 0 cc (No leakage) 4 Defective injector (including high pressure piping in head) a For check of return rate from injector, see Testing and adjusting, Checking fuel return rate and leakage. Return rate from injector During cranking (if engine cannot be started) Max. 90 cc/min.
During low idle (if engine can be started) Max. 180 cc/min. 5 Defective supply pump a For check of return rate from supply pump, see Testing and adjusting, Checking fuel return rate and leakage. Return rate from sup- ply pump During cranking (if engine cannot be started) Max. 140 cc/min. During low idle (if engine can be started) Max. 1,000 cc/min.