40 Troubleshooting UEN00244-00 E-16 Working mode does not change 1 PC210, 230, 240-8 33 Trouble (1) When working mode switch is operated, working mode selection screen is not displayed. Related infor- mation • Condition of signal of working mode switch can be checked with monitoring function. (Code: 04504 Monitor 1st, 2nd line switches) Possible causes and standard value in normal state Cause Standard value in normal state/Remarks on troubleshooting 1 Defective machine monitor Machine monitor may be defective. (Since trouble is in system, troubleshooting cannot be carried out.) Trouble (2) When working mode is changed, setting of engine and hydraulic pump is not changed.
Related infor- mation Possible causes and standard value in normal state Cause Standard value in normal state/Remarks on troubleshooting 1 Defective machine monitor Machine monitor may be defective. (Since trouble is in system, troubleshooting cannot be carried out.) 2 Defective pump controller Pump controller may be defective. (Since trouble is in system, trou- bleshooting cannot be carried out.)