UEN00245-00 40 Troubleshooting 8 PC210, 230, 240-8 Possible causes and standard value in normal state Cause Standard value in normal state/Remarks on troubleshooting 7 Defective adjustment or mal- function of LS valve a Prepare with engine stopped, then run engine at high idle and carry out troubleshooting. Measured oil pressure Operation of levers and oil pressure ratio All levers in neutral Travel with no load (Lever operated half- way) Pump discharge pressure Almost same pressure 1 PC valve output pressure Approx. 0.6 (Approx. 3/5) If oil pressure does not become normal after adjustment, LS valve may have malfunction or internal defect. Check LS valve directly.
8 Malfunction of servo piston Servo piston may have malfunction. Check it directly. 9 Defective piston pump Cause may be lowering of performance, malfunction, or internal defect of piston pump.