UEN00660-00 50 Disassembly and assembly Removal and installation of engine rear seal Special tools Removal 1. Remove the hydraulic pump assembly refer- ring to the section of Removing Hydraulic Pump Assembly. 7. Remove seal (5) as follows. a Use care in the removal so that the crank shaft may not be damaged. 2. Remove mounting bolt (1) and set guide bolt [1]. 3. Remove damper assembly (2). 4. Remove mounting bolt (3) and insert guide bolts [2]. [*1] a Width across flats: 18 mm 5. Lift temporarily flywheel assembly (4) and pull out flywheel assembly (4). a Be careful not to let the guide bolts drop out. 6. Lift off flywheel assembly (4) to remove it. 4 Flywheel assembly:
35 kg 14 PC210, 230, 240-8 Symbol Part number Part name Necessity Q’ty N/R Sketch A 2 795-799-6500 Seal puller t 1 N