50 Disassembly and assembly UEN00660-00 Removal and installation of cylinder head assembly a Pull out the hose while pushing lock (L) from both sides. 5. Disconnect fuel return hose (4). 6. Remove fuel filter and bracket assembly (5). Special tools Removal k Disconnect the negative terminal (–) of the battery before starting with the work. 7. Remove cover (6). 8. Remove clamp (7). 9. Remove the mounting bolt and lift off muffler assembly (8) to remove it. [*1] a Space for winding the lifting tool is small. 1. Remove cover (1). 4 Muffler assembly: 35 kg 2. Drain the engine cooling water. 6 Coolant: Approx. 21.4 l 3.
Remove the following referring to the section of Removing Engine and Hydraulic Pump Assembly. q Engine hood q Top cover on control valve q Cover between hydraulic pump and en- gine q Frame between control valve and engine q Cover between control valve and engine a The frame between the control valve and the engine should be kept installed as a foothold. 4. Disconnect fuel filter hoses (2) and (3) from fuel supply pump (FSP). a Remove dirt on the connector in advance.
(Because dirt sometimes makes lock (L) fit tight.) PC210, 230, 240-8 17 Symbol Part number Part name Necessity Q’ty N/R Sketch A 3 795-799-6700 Primer t 1 N 4 795-799-1131 Gear t 1 5 795-799-8150 Remover q 1 N 6 790-331-1120 Wrench (Angle) q 7 795-790-4510 Gauge q 1 N