Komatsu PC210-8, PC210LC-8, PC210NLC-8, PC230NHD-8, PC240LC-8, PC240NLC-8 — Removal and installation of cylinder head assembly

UEN00660-00 50 Disassembly and assembly a Be careful not to let any dust or foreign materials enter the fuel injector assembly mounting portion. 47. Remove nuts (49) for the harnesses from the injector. 48. Remove 12 mounting bolts and remove six rocker arm and crosshead assemblies (52). a Loosen locknut (50) and then loosen adjustment screw (51) a few turns so that excessive force is not put on the push rod when the rocker arm is installed. a Keep records of installation position and direction of the crosshead (hole shape of a and b parts) (Install it in the same direc- tion when reinstalling.) 49. Remove retainers (53) and then remove six inlet connectors (54).

a Remove and flush dirt etc., off the sur- rounding area in advance to prevent them from entering the connector holes. a Tool A5 : remover is adopted for removing inlet connectors (54). (Refer to the tool list.) 52. Remove push rods (57). 53. Remove rocker arm support (58). 54. Remove rocker housing assembly (59). 55. Remove 26 mounting bolts (60) and lift off cyl- inder head assembly (61) to remove it. 4 Cylinder head assembly: 75 kg 56. Remove cylinder head gasket (62). 50. Remove two mounting bolts (55) for injector assembly (56). 51. Remove injector assembly (56) using tool A3 . 22 PC210, 230, 240-8 Harness color Cylinder No. White 1, 3, 5 Black 2, 4, 6