UEN00660-00 50 Disassembly and assembly Removal and installation of assembly hydraulic oil cooler assembly Removal k Lower the work equipment to the ground completely, after the engine is stopped, loosen the hydraulic tank cap gradually to reduce the pressure inside, and set the lock lever in the lock position. 1. Turn the upper structure by 90 degrees. 2. Remove cover (1). 8. Disconnect reservoir tank hose (5). 9. Remove cover (6). 3. Open up the engine hood. 4. Remove hydraulic oil cooler drain plug (2) to drain the hydraulic oil. a Loosen upper side (return) hose (7) of the hydraulic tank and induce air into the tank. 10. Disconnect hydraulic tank return hose (7). a Stop oil flow.
6 Hydraulic oil cooler: Approx. 7 l 11. Remove hydraulic oil cooler mounting bolt (8). 5. Move cover (3). 6. Open the left side cover. 7. Disconnect control valve drain hose (4). a Stop oil flow. 32 PC210, 230, 240-8