UEN00660-00 50 Disassembly and assembly Removal and installation of aftercooler assembly. Removal 1. Turn the upper structure by 90 degrees. 2. Remove cover (1). 3. Open up the engine hood. 4. Disconnect reservoir tank hose (2). 5. Remove cover (3). 7. Remove cover (5). 6. Remove hose and tube assembly (4). [*1] a MIKALOR clamp a Mark the hose edge and tube to show the original hose installation positions. (See figure below.) a Inserted air hose length q A : 80 mm q B : 65 mm 34 PC210, 230, 240-8