Komatsu PC210-8, PC210LC-8, PC210NLC-8, PC230NHD-8, PC240LC-8, PC240NLC-8 — Disassembly and assembly of final drive assembly

50 Disassembly and assembly UEN00661-00 12. Cover 1) Use an eyebolt [1] to install cover (1). 2 Mating surfaces of cover and ring gear: liquid gasket (LG-6) 13. Oil refill Tighten drain plug and fill power train oil ( TO30 ) from the oil filler port. 5 Final drive case: Approx. 5.4 l a Do a final check of the oil level at the determined position after installing the final drive assembly to the chassis. 2) Use the tool J7 to tighten 20 mounting bolts. 3 mounting bolts: first time: 147 Nm {15 kgm} second time: 85 – 95° (rotating angle) PC210, 230, 240-8 19