Komatsu PC210-8, PC210LC-8, PC210NLC-8, PC230NHD-8, PC240LC-8, PC240NLC-8 — Disassembly and assembly of track roller assembly

50 Disassembly and assembly UEN00662-00 Disassembly and assembly of track roller assembly Assembly 1. Using push tool [1], press fit bushing (9) and (10) to roller (4). Special tools 2. Fit an O-ring and install collar (8) to shaft (5), and insert pin (7). Disassembly 1. Remove pin (1) and then collar (2). 2. Remove floating seal (3) from collar (2) and roller (4). 3. Pull out roller (4) from shaft (5) and collar (8) assembly. a Since 195 cc of oil is filled in, drain it at this timing, or underlay some cloth to pre- vent any careless smearing. 4. Pull out other side floating seal (6) from roller (4), shaft (5) and collar (8) assembly. 5. Remove pin (7) and then collar (8) from shaft (5). 6.

Remove bushing (9) and (10) from roller (4). PC210, 230, 240-8 5 Symbol Part number Part name Necessity Q’ty N/R Sketch L 2 796-670-1020 Installer t 1