50 Disassembly and assembly UEN00662-00 Removal and installation of revolving frame assembly Removal k Safely lower the work equipment to the ground by extending the arm and the bucket completely. Set the lock lever in the lock position, 1. Disassemble the work equipment assembly, referring to the Disassembling Work Equip- ment Assembly section in this manual. 2. Disassemble the work equipment assembly, referring to the Disassembling Work Equip- ment Assembly section in this manual. 3. Disconnect four boom cylinder hoses (1). a Plug the hose to stop oil flow-out. 6. Remove fuel filter and bracket assembly (5). a Fix it temporarily on the engine.
a When other parts can interfere with the lift- ing hook in removal of the revolving frame, such parts must be removed beforehand. 4. Sling boom cylinder assembly (2). 5. Remove plate (3) and pin (4), and then lift boom cylinder assembly (2) to remove. a Remove the boom cylinder assembly on the opposite side in the same manner. 4 Boom cylinder assembly: 180 kg (PC210, PC230) 200 kg (PC240) PC210, 230, 240-8 15