50 Disassembly and assembly UEN00663-00 Disassembly and assembly of hydraulic cylinder assembly a Place a container under the cylinder to catch the oil. Special tools 4) Disassemble the piston rod assembly as follows. 1] Set piston rod assembly (2) in tool U1 . 2] Remove stopper screw (3) of piston assembly. a Common to the boom, arm and bucket cylinder. Screw size: M12 x Pitch 1.75 Disassembly 1. Piston rod assembly 1) Remove piping from the cylinder assem- bly. 2) Remove the mounting bolts and then dis- connect head assembly (1). 3) Pull out piston rod assembly (2).
PC210, 230, 240-8 25 Symbol Part number Part name Necessity Q’ty N/R Sketch U 1 790-502-1003 Cylinder repair stand q 1 790-101-1102 Pump q 1 2 790-102-4300 Wrench assembly t 1 790-102-4310 Pin t 2 3 790-720-1000 Expander q 1 4 796-720-1670 Rubber band (for boom and arm) q 1 07281-01279 Clamp q 1 796-720-1660 Rubber band (for bucket) q 1 07281-01159 Clamp q 1 5 790-201-1702 Push tool kit t 1 • 790-201-1831 • Push tool (for bucket) 1 • 790-201-1930 • Push tool (for arm) 1 • 790-201-1940 • Push tool (for boom) 1 • 790-101-5021 • Grip 1 • 01010-50816 • Bolt 1 6 790-201-1500 Push tool kit (for bucket) q 1 • 790-201-1640 • Push tool 1 • 790-101-5021 • Grip 1 • 01010-50816 • Bolt 1 790-201-1980 Plate (for boom) q 1 790-201-1990 Plate (for arm) q 1 790-101-5021 Grip q 1 01010-50816 Bolt q 1