UEN00663-00 50 Disassembly and assembly a If the caulking of screw (3) is too strong and it cannot be removed, tighten the screw fully, then fit tap (T) to the thread and remove the screw. 7] Remove cap (8), and pull twelve balls (9), then remove plunger (10). q Arm cylinder only 3] Using tool U2 , remove piston assem- bly (4). 2. Disassembly of piston assembly 1) Remove ring (11). 2) Remove wear ring (12). 3) Remove piston ring (13). 4) Remove O-ring and backup ring (14). q When not using tool U2 , use the drill holes (H)(ш10: 2 places) and loosen piston assembly. 4] Remove plunger q Boom and arm cylinder only 5] Remove collar (6). q Boom and arm cylinder only 6] Remove head assembly (7).
26 PC210, 230, 240-8