Installation Step 6 - Connect the Helm Components. Connect the CE50100 Helm Harness. 1. Plug the large grey 12 pin connector into the CE504XX Engine Harness. 2. Plug the “Key Switch” into the 4 pin CP19500 connector. 3. Connect J6A and J6B to the appropriate ends of the CP19500 cable. 4. Connect the J3 Tach to the optional gauges or tie back. See Appendix I. (CE50603, CE50607 CE50610 are extension cables for CE504XX) 1. 3. 2. 4. Electronic Control System: Single Engine Installation Manual for BY Series Engines with Unlimited Controls Page 18 © Yanmar 2008