Komatsu — REPLACE BUCKET TEETH (HORIZONTAL PIN TYPE)

. MAINTENANCE MAINTENANCE PROCEDURE WARNING REMARK mothod, 4 - 32 REPLACE BUCKET TEETH (HORIZONTAL PIN T Replace t he teeth before th e wear reaches th e adapter replacin Set the work equipment in a stable condition, sto p the engi ne, then set lock lev er (1) securely to the LOCK position (L). As the lo cking pin is knocke d out with force , ther e is danger that the pin may fly out. Check that ther e is no one nea r the machine. Broken pieces may fly dur ing the replacement operation wear saf ety glasses, gloves , or other protective equipment 1.

To ma ke it possible to k nock out pin ( 1) of tooth (2) , put block der the bottom of the bucket, and se t so that the bottom e of the bucket is 2. Place a bar on the head of pin (1), hit the b ar with a hammer to out the pin, then remove tooth emo have y our Komatsu distr ibutor replace the bucket te 3. Clean tooth n pin (1) partially by hand, then lock it with a hammer to the tooth to the b