Scania — Machining the valve seats insert

Engine Tier-3 710655- Ch 1 page 53 Machining the valve seats insert Machining values Inlet valve A = 1,9 - 2,6 mm B = 0,75 - 1,8 mm C = diameter 39,8 +/- 0,5 mm (setting value for machining tool) Exhaust valve A = 1,8 - 2,6 mm B = 0,66 - 1,8 mm C = diameter 37,9 +/- 0,5 mm (setting value for machining tool) Work description The following description applies to valve seat cutter 512265. Machining values and over-sized valve seat inserts, see Specifications and above. 512265 1. Check that the contact surface and the magnetic base are smooth and clean. Clean the valve bushings. 2.

Select the largest spindle which slides easily into the valve guide.Insert the guide spindle and turn the feed screw to its uppermost position. SHOP MANUAL MT26-31 - 06.2005