Engine Tier-3 710655- Ch 1 page 54 3. Select and fit the cutter. 4. Release the quick-action lock and move the pivot plate to the upper position with the adjusting screw. 5. Set up the dial on the cutter adjuster using a valve. 6. Adjust the cutter. Diameter 37.9 mm or 39.8 mm, see Machining values. 7. Disconnect the magnetic base (position 2). Insert the guide spindle into the valve bushing. Adjust the pivot plate so that the distance between the cutter and the valve seat is approximately 1 mm. Centre the tool precisely. 8. Connect the magnetic base (position 1). 9. Apply the quick-action lock. Make sure the crank can be turned easily. If not, redo the centering.
SHOP MANUAL MT26-31 - 06.2005