Scania — Fitting the PDE injector

Engine Tier-3 710655- Ch 1 page 58 PDE Injectors Each unit injector consists of a pump element, a solenoid valve and a nozzle. In this way, it is possible to control the fuel injection for each individual cylinder. EMS (Engine Management System) is the electronic system that controls both how much fuel each unit injector should inject into the cylinder and also when the unit injector should inject the fuel. This control of the injection means that we can optimise the com­ bustion, which in turn leads to cleaner exhaust gases. The control unit is the brain of the EMS system.

The control unit processes the information both from the sensors and the compo­ nents that are part of the EMS system and also from the control units in other systems. When the control unit has processed the information, it then trans­ mits signals to the unit injectors. The signals control the injection of the fuel. The EMS system makes possible such functions as for example a special cold start programme. Fitting the PDE injector Specifications Tightening torques: Lock nut on rocker arm 39 Nm Bolt for fork on unit injector.

20 Nm + 75° Bearing bracket and rocker arm shaft 105 Nm Screws for cable connections on unit injector 2 +/- 0.2 Nm Special tools Number Description Illustration 512562 Torque screwdriver SHOP MANUAL MT26-31 - 06.2005