Engine Tier-3 710655- Ch 1 page 65 Checking, adjusting the PDE32 injector rocker arms (I) - Turn the flywheel with tool 8405 to valve overlap on cylinder 1 (which corresponds to TDC Up (0°) in the opening). Then turn the flywheel anti-clockwise 144° at a time and observe the valve overlap. Adjust the valves according to the table below. UP TDC Firing order: 1-2-4-5-3 1 2 8405 3 4 5 FLYWHEEL Cylinder numbering NOTE ! The adjustable value for the injectors are aprox ±0,2 mm. If the value is e.g. 0,8-1,0 mm, then check the position of engine. SHOP MANUAL MT26-31 - 06.2005 Start the adjusting prosedure again and follow the table be low.
Valve overlap on cylinder Adjust the valves on cylinder Adjust unit injector rocker arm on cylinder TDC Up (0°) 1 5 5 2 3 3 4 1 1 5 2 2 3 4 4