Scania — Checking, adjusting the PDE32 injector rocker arms (I)

Engine Tier-3 710655- Ch 1 page 66 Dimension A= PDE32: 69.9±0.1 mm Dimension B= PDE32: 38.5 mm Placing of the tool 512264 Check the clearanse, using a finger to sense that the small piston is level with the flat upper surface of the tool. It is a good idea to mark the rocker arm with a pen after adjustment to keep track of what has already been adjusted. Torque tighten the lock nut to 39 Nm after adjusting. SHOP MANUAL MT26-31 - 06.2005