Doosan Infracore D18NAP — Procedure of Disassembling an Engine

6. About the engine 21. Remove the exhaust mainfold. 1) Loosen 2 fixing bolts (C). 1 2) Loosen 2 flange hex bolts (B). 3) Remove the heat screen (A). A 23. Remove the glow plug. B C C A D D B EDL013018A 2 A EDL013021A B 1) Loosen 3 hex nuts (D) and remove 3 washers (C). C 2) Remove the electric connector (B) and 3 glow plugs (A). 24. Remove the fuel return hose. D B EDL013019A A 1) Remove the exhaust gas temperature sensor (D). C 2) Loosen 6 flange hex bolts (C). 3) Remove the exhaust manifold (B) and the gasket (A). B 22. Remove the heat screen. C EDL013022A B 1) Loosen the flange hex bolts (C). 2) Remove the hose clips and disconnect the fuel hose (A). A EDL013020A 6 - 12