6. About the engine 25. Remove the water pump pulley. 27. Remove the right and left cylinder head cover. A A B B C D EDL013023A EDL013025A 1) Loosen 4 flange hex bolts (B). 1) Loosen 8 flange hex bolts (D). 2) Remove the right cylinder head cover (C). 2) Remove the water pump pulley (A). 26. Remove the water pump. 3) Loosen 10 flange hex bolts (B). 4) Remove the left cylinder head cover (A). B A 28. Remove the injectors. B C D D C A EDL013024A 1) Loosen 2 flange hex nuts (D) and 4 hex bolts (C). 2) Remove the water pump (B) and the gasket (A). EDL013026A 1) Loosen 3 hex bolts (D). 2) Remove 3 injector fixtures (C). 3) Remove 4 injectors (B). 4) Remove 3 injector seal ring washers (D).
CAUTION Do not reuse the head cover rubber seal and the injector oil seal but replace with new ones. Be careful not to damage the injector oil seal of the cylinder head cover. Remove it by turning the injector slowly from left to right. 6 - 13