Doosan Infracore D18NAP — Procedure of Disassembling an Engine

6. About the engine 31. Remove the push rods. CAUTION Do not reuse the injector seal ring washers. Reuse of the injector seal ring washers may cause A critical damage to the engine due to unstable combustion. 29. Remove the cylinder head cover. A B EDL013029A 1) Remove 6 push rods (A). 32. Remove the cylinder head. EDL013027A C 1) Loosen 10 hex bolts (B). 2) Remove the cylinder head cover (A). B 30. Remove the rocker arm. A B EDL013030A A 1) Loosen 14 cylinder head bolts (C). 2) Remove the cylinder head (B). 3) Remove the cylinder head gasket (A). CAUTION Do not reuse the cylinder head gasket but replace with new one. EDL013028A 1) Loosen 8 flange hex bolts (B). 2) Remove the rocker arm (A).

6 - 14